Large infusion washing, drying, filling and rolling production line
Equipment introduction:
This line is composed of bottle feeder, ultrasonic bottle washer, tunnel sterilization oven, transition bottle feeder, filling and stopper machine, and capping machine;
The production line is suitable for 50-500ml infusion bottle production. Effectively complete unpacking and bottle loading, ultrasonic rough washing, water and air washing, drying and sterilization, filling, stoppering, capping and capping. The production line has stable performance, low noise and no pollution. In addition to online use, the equipment can also be used as a stand-alone device, and can provide a sterile isolation system.
Technical Parameters:
Loading range |
50-500ml |
Production capacity |
30-60/60-100/120-200Bottle/min |
Filling accuracy |
±1% |
Pass rate |
≥99% |
Air consumption |
45m³/hour |
Water consumption |
0.3-0.4Mpa 1m³/h |
Power |
380V 50Hz |
Dimensions |
15000×2000×2000(mm) |